Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Frankfort, KY
We service Gelco caps, dampers and firebox components across Frankfort as an independent provider – not affiliated with, sponsored by, or endorsed by Gelco. What makes our Gelco work here different is that we understand how Kentucky River valley backdraft and bluff-side pressure pockets make a perfectly clear flue behave like a blocked one. Our technicians have up to 12 years of experience, and we handle cap replacement, damper repair, and creosote removal on the same visit whenever the job allows. Call (833) 946-8918 for a free estimate.

Why Frankfort Residents Choose Us for Gelco Service
Gelco caps, top-mount dampers and firebox panels turn up in Frankfort flues often enough that we keep the fit and clearance details straight in our heads. We’re chimney-only specialists. That matters with Gelco equipment, because a prefab firebox that’s been serviced with the wrong-size cap or a hardware-store damper will keep smoking into the room no matter how many times the flue gets swept.
We work with professional-grade brands – DuraFlex, HeatShield, Olympia Chimney, Famco and Copperfield included – so when a Gelco part is discontinued or the flue has been relined, we choose a replacement that actually seats and seals instead of forcing a mismatched fit. Scheduling is simple: we book the work, arrive with the right tools for the unit, and give you a written estimate before anything is installed. Whether your home sits near downtown in 40601 or out on the rural fringe, the estimate is free and the price is set per job.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Frankfort
Here’s what we run into most on Gelco equipment around Frankfort.
- Multi-flue and chase caps pulled loose. Rusted or stripped fasteners give way in Kentucky River valley wind, and the cap lifts enough to let rain and downdraft straight into the flue. Once a cap pulls free, the smoke and water entry show up long before the damage does.
- Top-mount dampers seized after humid summers. Frankfort’s humid summers lock a Gelco top-mount damper open or shut. Open means you’re heating the neighborhood; shut means the fire smokes back into the room on a cold morning. We free or replace the assembly rather than living with the workaround.
- Cracked refractory and firebox panels. Heat cycling cracks panels in Gelco prefab fireboxes, and a cracked panel lets heat reach the metal cabinet behind it. That’s a genuine safety concern, so we inspect the whole firebox rather than just the visible face.
- Caps that no longer seat on a spalled crown. Freeze-thaw has spalled the clay tile crowns on plenty of older brick ranches and farmhouses on the rural fringe, so a Gelco cap sized to the original crown sits on a gap and admits water. Reseating or upsizing the cap is often the whole fix.
- Weak draft from bluff-side negative pressure. Hillside homes above the Kentucky River draw poorly into a tall stack, and a Gelco-capped flue here can test smoky while the flue itself is clear. A cap that reads as the problem isn’t always blocked – it’s fighting the pressure pocket.
Gelco Service in Frankfort: What Local Conditions Mean for Your Equipment
Frankfort sits in the Kentucky River valley, and that changes how a Gelco-capped flue behaves. Cool air pools low on damp winter mornings, so chimneys stay cold and draft weakly until the fire has warmed the flue. Along the hillside streets above the river, tall stacks run into a negative-pressure pocket against the bluff, so a Gelco cap that seals perfectly well at grade can still backdraft at the top. Homeowners read that as a blockage and sweep the flue twice. It isn’t blocked. The cap, the top-mount damper, and the stack height are the conversation now.
The valley location cuts both ways through the year. Humid summers feed masonry deterioration and efflorescence, which is why Gelco dampers seize and crowns spall the way they do here. And out on the rural edges, where a lot of homes run freestanding wood stoves or inserts as primary or backup heat, the creosote load is heavier than a gas-appliance tune-up would suggest. We plan the visit around which of those two problems your home actually has, not a script.
Gelco Models & Products We Service in Frankfort
We service Gelco stainless multi-flue chimney caps, top-mount damper assemblies, prefab fireplace firebox and refractory panels, and chase covers and termination caps for factory-built fireplaces. The point of working with the actual Gelco components is fit. On prefab fireplaces, clearances and dimensions decide whether a part works, so we use Gelco OEM caps, dampers and firebox panels wherever the original unit is still serviceable.
We switch to a quality aftermarket cap or damper only when the OEM part is discontinued or the flue has been relined. We’re an independent service provider. We’re not a Gelco dealer and we don’t claim to be factory authorized – we work on what’s actually installed in your flue and firebox, and we use quality parts that fit it.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Frankfort
Pricing depends on what the unit needs: a cap reseat or replacement sits at the low end, a top-mount damper repair or replacement in the middle, and a firebox panel or refractory job runs higher because of the disassembly involved. A full creosote sweep, common on the wood-stove setups out on the rural fringe, is its own line. The written estimate you get before work begins is the final price – the ranges we quote are typical, not exact.

Every estimate is free, and we tell you plainly when something can safely wait. Call (833) 946-8918. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Serving Frankfort, KY – Our Local Coverage Area
We serve Frankfort and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Frankfort
It’s almost always cold-flue draft loss, made worse by the river valley pooling cool air. The chimney is cold, so the fire fights for draft until the flue warms. A seized Gelco top-mount damper or a cap that’s pulling draft off a bluff-side pressure pocket makes it worse. We diagnose which before recommending any part. Call (833) 946-8918 for an exact quote – estimates are free.
Yes. Humid summers feed the rust and seize that lock Gelco top-mount dampers open or shut and that strip cap fasteners. That’s why dampers and caps fail here more than the flue itself does. A trained technician checks both on every visit.
It depends on how far the cracking goes. Panels crack from repeated heat cycling and let heat reach the metal cabinet, which is a real safety issue. We replace the panels where the cabinet is sound and say so plainly when a firebox is cracked through and needs a new unit rather than a reseal.
Not always. On the hillside streets above the Kentucky River, tall stacks run into a negative-pressure pocket against the bluff and backdraft even with a clear flue. A qualified technician checks draft and cap placement before assuming a blockage. Call (833) 946-8918 for an exact quote – estimates are free.
Yes, an independent provider can work on your Gelco equipment. We’re independent – not authorized, sponsored, or endorsed by Gelco – and we use quality parts that fit the unit. We’re straightforward about OEM versus aftermarket so you know exactly what’s going in.
Service Areas Near Frankfort
We also serve homeowners in Lexington, Nicholasville, Versailles, Winchester, Paris, and Georgetown, with Lawrenceburg close enough that rural-fringe Gelco calls there are routine. For Frankfort and the towns around it, we handle the full service cycle – inspect, sweep, repair – by Gelco and the other professional brands we work with.
Book Your Gelco Service in Frankfort Today
Call (833) 946-8918 for a free estimate on your Gelco cap, damper, or firebox. We find it, we fix it, and we tell you when work can safely wait. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Lexington Chimney Cleaning.