Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Lexington Homeowners
Most chimney problems don’t announce themselves. Creosote builds up quietly, a flue liner cracks behind the mortar, and a cap loosens in the wind, all without a sound. That’s exactly why an inspection matters before you strike the first match of the season. Our technicians have up to 12 years of experience and work on chimneys only, not roofs or furnaces on the side. We use professional-grade parts from brands like Famco and Copperfield, and we can often fit you in the same day. Call (833) 946-8918. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Fireplace Inspection
Fireplace Inspection is the walk-through of the firebox, damper, smoke chamber, and firebox walls that tells you whether your fireplace is safe to burn in. You need it before the first fire of the year, after any chimney fire, or whenever smoke backs into the room. At Lexington Chimney Cleaning, we check the firebox brickwork for spalling, test that the damper opens and seals fully, and look at the smoke shelf for soot buildup that can push smoke into your living space. A fireplace inspection in Lexington typically runs $89-$175 depending on the fireplace type and how much access we have. Gas and wood-burning fireplaces get different checks, and we tailor the visit to what you own.
Wood-Burning Fireboxes
Wood fireplaces take the most abuse from heat cycling, and the brick joints are usually the first place it shows. We check for cracked mortar, loose brick, and a damper that no longer seats properly. Catching a deteriorating firebox early keeps a small repair from turning into a rebuild.
Gas Fireplace Checks
Gas fireplaces don’t build creosote the way wood does, but their venting still needs a look. We inspect the vent termination, check for blocked flue passages, and make sure the appliance vents properly. A gas unit that vents poorly can send combustion byproducts back into the room, so this check isn’t optional.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Inspection Services
Chimney Inspection Services cover the whole system from the firebox up through the cap, giving you a clear picture of what’s sound and what needs attention. You need these services if it’s been more than a year since the last look, if you just bought the house, or if you’re noticing smoke, odor, or water where there shouldn’t be any. We start with a visual check of the exterior, then move inside to the flue and firebox, and we always document what we find with photos. A standard chimney inspection in Lexington costs $89-$175, and a camera-assisted inspection runs $175-$350. When a sweep uncovers a problem, we handle the repair too, so you’re not chasing down a second contractor.
What the Visit Covers
We check the crown, cap, flashing, flue tiles, damper, and firebox, plus the exterior masonry joints. Every finding comes with a photo so you can see it yourself instead of taking our word for it. Nothing gets recommended unless the camera shows it.

When to Book One
Book a visit once a year if you burn regularly, and any time you move into a new home. If you’ve had a chimney fire or a storm knocked something loose on the roof, don’t wait for the annual schedule. Call us and we’ll get you on the books.

Chimney Flue Inspection
Chimney Flue Inspection focuses specifically on the inside of the flue, the passage your smoke travels through on the way out. It’s the check that catches cracked tile liners, gaps at the joints, and heavy creosote glazing that a quick glance from the firebox can’t reveal. You need one whenever there’s been a chimney fire, a liner concern, or a change to your heating appliance. We run a camera down the flue and read the liner condition section by section, then explain what we see in plain terms. A flue inspection in Lexington typically costs $175-$350 when a camera is involved, and it’s included in the standard inspection when we can see the full run. For homes in the older neighborhoods around Lexington, a flue check is often the most useful part of the visit.
Liner Condition and Joints
A clay tile liner can look fine from the top and still have cracked joints further down. We check the mortar between tiles and the condition of each section. A failed liner lets heat and gases reach the framing, which is a serious fire risk.
Creosote and Soot Levels
We grade the creosote buildup so you know whether a sweep is due now or can wait. Glazed, tar-like creosote burns hot and is the leading fuel for chimney fires. If we find it, we’ll tell you straight and recommend a sweep.
Chimney Fire
Chimney Fire damage is what an inspection is really looking for, because most chimney fires go out on their own and leave no obvious sign. A slow, smoldering fire can crack the flue liner and warp the damper without ever sending flames out the top. If you’ve heard a roaring sound, seen sparks or flames from the chimney, or noticed cracks after a hot burn, get it inspected before you light another fire. We check the liner for heat damage, look for cracked tiles, and inspect the smoke chamber and cap for warping. A post-chimney-fire inspection in Lexington runs $175-$350 with camera work, and any needed liner repair is quoted separately. Safety comes first here, so we’ll tell you honestly if the chimney shouldn’t be used until repair is done.
Signs a Fire Happened
Puffy, honeycombed creosote and cracked flue tiles are the classic evidence. Neighbors sometimes hear a distant rumble, but often nobody notices. That’s why an annual inspection matters even if your chimney seems fine.
Repair After the Fire
A damaged liner needs to be relined before the chimney goes back into service. We install DuraFlex liner systems and use HeatShield resurfacing for the right cases. Both are professional-grade solutions, not generic substitutes.
Level 2 Chimney Inspection
Level 2 Chimney Inspection is the thorough, camera-based inspection you need at key moments: buying or selling a home, after a chimney fire, after an earthquake or major storm, or when you switch appliance types. It goes beyond the basic visual check and examines every accessible part of the chimney, including the flue interior with a camera. We also check the attic and any spaces around the chimney to spot hidden damage. A Level 2 inspection in Lexington usually costs $175-$350, and you get a written report with photos. If you’re in the middle of a home sale, this is the report your buyer’s inspector will want to see. The camera evidence is yours to keep and share.
When It’s Required
Real estate transactions and post-fire situations are the two most common reasons. A change in fuel type or appliance also calls for the deeper look. Verifying a liner’s condition before you commit to a property protects you from surprise repair costs.
What Makes It Different
The camera is the key difference, letting us see the full flue run and every joint. We document the findings and hand you a report you can actually read. There’s no guessing about what the inside of your chimney looks like.
Chimney Leak
Chimney Leak problems usually start at the top, where a worn cap, failed flashing, or cracked crown lets water in. The water then travels down the masonry, stains ceilings, and rusts the damper, and it can look like a roof problem when it’s really the chimney. You need a leak inspection if you see water stains near the chimney, rust on the damper, or white efflorescence on the brick. We track the water path from the cap down through the flashing and crown, then identify the actual entry point instead of guessing. A chimney leak inspection in Lexington typically runs $175-$350, and repair is quoted after we find the source. Fixing the cause beats sealing the symptom, so we won’t just caulk it and hope.
Common Entry Points
Flashing where the chimney meets the roof is the usual suspect, especially on older Lexington homes. A cracked crown and a missing or rusted cap let water straight into the flue. We check all three before recommending any repair.
Repair Options
Depending on what we find, the fix may be new flashing, a crown repair, or a properly fitted cap from a maker like Copperfield. Sometimes a masonry crack needs sealing. We quote the repair after we’ve seen the source, and you get photos of the problem first.
Chimney Camera Inspection
Chimney Camera Inspection uses a video camera lowered through the flue to see the parts you can’t reach by eye, and it’s the clearest way to know your liner’s true condition. You need one when there’s a suspected liner crack, a chimney fire history, or a home purchase on the line. We feed the camera down the full run and watch the liner joints, offsets, and any gaps in real time, then record the footage so you can review it yourself. A chimney camera inspection in Lexington runs $175-$350 depending on the flue’s length and layout. The footage is included in your report, which makes it easy to get a second opinion if you want one. We find it, we fix it, and you see the evidence before any work is approved.
How the Camera Works
We lower a lit camera on a flexible cable and watch the feed on a screen as it descends. The footage reveals cracks, gaps, and creosote the eye misses. You can watch along with us if you’re curious.
Reading the Footage
We point out each area as it appears and explain what it means in plain language. If a section is fine and can wait, we’ll say so. The report gives you a record you can keep.
Brands We Service
We work with DuraFlex liner systems and know where they wear and how they should be installed for a long service life. Our familiarity with HeatShield resurfacing means we can bring a deteriorating flue back into service without a full reline when the condition allows. We also fit Famco and Copperfield components for caps and venting, so the top of your chimney performs the way it should.
Whether you have DuraFlex, HeatShield, Famco, Copperfield, or any other make, we can help. Choosing the right component for your flue matters as much as the inspection itself, and our single-trade focus on chimneys means we’re not guessing.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Smoke backing into the room. A blocked or undersized flue, or a closed damper, pushes smoke inside instead of up. This can mean a nest, a partial collapse, or heavy creosote that needs clearing before you burn again.
- Strong, lingering odor from the fireplace. A sour or smoky smell long after the fire is out often points to creosote or moisture in the flue. It’s a sign to get the chimney looked at before the next burn.
- Water stains or rust near the chimney. Brown ceiling rings or a rusted damper tell you water is getting in somewhere up top. The sooner we trace the leak, the less masonry gets damaged.
- Cracked or crumbly firebox brick. Heat-cycled firebox brick can spall and separate from the mortar. Loose pieces are a fire hazard and a sign the firebox needs attention.
- A roaring sound or sparks from the chimney. This is a chimney fire, even if it burns out quickly. The liner may be cracked, so treat it as a warning to get inspected right away.
Our Process, Step by Step
- 1
Book the visit. We take your address and a quick description of the fireplace or stove, then schedule the inspection. If you need a same-day slot, tell us and we’ll do our best to fit you in.
- 2
Exterior and top-side check. We inspect the crown, cap, flashing, and masonry joints from the roof, looking for the entry points that cause leaks and, later, water damage.
- 3
Interior flue and firebox inspection. We check the firebox, damper, smoke chamber, and flue, and run a camera down the liner when needed. Every section gets looked at, not just the top.
- 4
Document and explain. We take photos and video of anything we find and walk you through what it means. Nothing gets recommended unless the footage shows it.
- 5
Sweep or repair, same visit if you want. If the inspection calls for a sweep or a repair, we can often handle it before we leave, so you don’t need a second appointment. The written estimate sets the final price.
How Much Does Chimney Inspection Cost in Lexington?
A typical fireplace and chimney inspection in Lexington runs $89-$175 depending on the fireplace type and how much of the flue we can see without a camera. When the flue needs camera work, or you need a Level 2 inspection for a home sale or a past fire, expect $175-$350. A basic sweep paired with an inspection stays within those ranges, and any liner repair, like HeatShield resurfacing or a DuraFlex install, is quoted separately after we’ve seen the condition.
What moves the price: the number of flues in the chimney, whether the fireplace burns wood or gas, how much access we have at the roof, and whether a camera is needed to reach hidden sections. A straight flue with good access sits at the low end. A stacked, offset flue or a wood stove insert pushes toward the higher figure.
How to avoid overpaying: ask for the inspection findings with photos before approving any repair. A chimney that can safely wait should be told so, and a technician who recommends work without camera evidence is a reason to get a second look. We include camera inspection and a photo report with every job, and nothing gets recommended until you’ve seen it yourself. The written estimate is the final price, so there are no surprises after the fact.
Our Service Area Near Lexington
We serve homeowners across central Kentucky, including Lexington, Nicholasville, Versailles, Winchester, Paris, Georgetown, Wilmore, Richmond, Lawrenceburg, and Frankfort. If you’re just outside one of these towns, give us a call and we’ll let you know what we can do. Booking ahead for the fall gets you on the schedule before burning season starts. For the full range of our work, see Lexington Chimney Cleaning.
Serving Lexington, KY – Our Local Coverage Area
We serve Lexington and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Inspection in Lexington
A chimney inspection is a visual and, when needed, camera-based check of the firebox, damper, flue, cap, crown, and exterior masonry to confirm the system is safe to use. It identifies creosote buildup, cracked liners, water entry, and other problems before they become a fire or carbon monoxide risk. At Lexington Chimney Cleaning, we document everything with photos so you can see what we found. Call (833) 946-8918 to book yours.
A standard inspection usually takes 30 to 60 minutes, and a Level 2 or camera-assisted inspection can run 60 to 90 minutes. The time depends on how many flues the chimney has, the appliance type, and roof access. We’ll tell you at booking roughly how long to set aside. Call (833) 946-8918 for a time estimate.
A standard chimney inspection in Lexington typically runs $89-$175, while a camera-assisted or Level 2 inspection runs $175-$350. The price depends on the number of flues, the fireplace type, and whether a camera is needed to reach hidden sections. The written estimate sets the final price, so there are no add-ons after the fact. Call (833) 946-8918 for an exact quote; estimates are free.
Yes, we install and service DuraFlex liner systems and use HeatShield resurfacing for the right repair cases. We also fit Famco and Copperfield components for caps and venting. Our technicians work with these professional brands because they hold up under real chimney conditions. Call (833) 946-8918 and tell us what you have.
Same-day inspection is often possible depending on the day’s schedule. We answer 24/7, and fast dispatch runs from 7am to 7pm. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (833) 946-8918 to check availability.
The inspection itself is a service, and any repair we quote comes with the terms laid out in the written estimate before work begins. We recommend the repair only after camera evidence shows the need, so you’re never paying for a guess. Ask us to walk you through the terms at booking. Call (833) 946-8918 with any questions.
Clear the area around the fireplace, make sure the damper is accessible, and move any furniture that blocks the hearth. If you have pets, put them somewhere safe while we’re working. Let us know at booking if you have a wood stove insert, since those need a little extra time. Call (833) 946-8918 to set a time.
Schedule Your Chimney Inspection Service in Lexington Today
Don’t wait until the first cold snap to find out your chimney needs attention. Call (833) 946-8918 to book an inspection in Lexington, and we’ll check the firebox, flue, cap, and everything in between with camera evidence you can see for yourself. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free and there’s no obligation. If a repair needs to be done, we’ll handle it in one visit, and if it can safely wait, we’ll tell you so.
Written by the team at Lexington Chimney Cleaning.