Masonry repair
Sweep & inspection
Caps & crowns
Flue relining
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Richmond
If your chimney is pulling away from the roofline, leaking around the flashing, or dropping brick dust into the firebox, you’re in the right place. We handle chimney repair in Richmond, KY, from mortar repointing and crown work to full rebuilds and liner installation, using professional-grade materials like HeatShield and DuraFlex. Richmond homes are packed tight in spots, especially near downtown, and a chimney problem on one side of a shared stack can affect the other, so this isn’t work to leave to a general handyman. Call (833) 946-8918 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Richmond Homeowners Call Lexington Chimney Cleaning for Chimney Repair
We’re chimney-only specialists. That matters in Richmond, where the housing stock runs from early-1900s brick homes near downtown to mid-century ranches and newer builds across the 40475 ZIP code. Each type fails in its own way, and a technician who sees fireplaces, wood stoves, and inserts every day reads the signs faster than a roofer or HVAC tech fitting chimneys between other jobs.
Our technicians have up to 12 years of experience, and every job stays within the three services we actually offer: inspection, sweep, and repair. So when a sweep turns up a cracked crown or a rusted damper, the same call covers the fix. We find it, we fix it. We’re insured and bonded, and we work with the professional chimney trade brands that certified specialists use nationwide: HeatShield, DuraFlex, Gelco, Olympia Chimney, Famco, and Copperfield.
We know the route into Richmond, whether you’re off the Eastern Bypass or out toward the county line, and we know that older brick chimneys around the downtown core need a different approach than a manufactured fireplace in a newer subdivision. That local read is the difference between a patch that lasts a season and a repair built to last.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Masonry Repair in Richmond
Chimney masonry repair in Richmond starts with diagnosis, because brick on a hundred-year-old exterior stack almost never fails for one reason. The crown cracks over a few Kentucky spring rain cycles and lets water down behind the liner, the damper rusts shut, and the brick faces begin to spall. Repointing soft, eroded mortar joints typically runs $350 to $900 depending on how many courses are involved; a new cast crown or a HeatShield crown coating usually lands between $400 and $900; and a partial rebuild of the top courses can run $1,500 to $3,500 or more when the stack has pulled away from the structure.
Repointing and Tuckpointing
We grind out failed mortar to a consistent depth and repack it with a mix matched to the original brick, so the repair moves with the wall instead of cracking around it. On pre-war Richmond homes this also seals the small gaps rain finds on the windward side of the stack.
Spalled Brick and Crown Work
Flaking, crumbling brick faces get cut out and replaced, and we look hard at the crown above them. A crown that sheds water away from the flue is what keeps the whole repair working, so we form it with a proper overhang rather than smearing mortar over a flat top.
Chimney Cap Installation in Richmond
Chimney cap installation in Richmond is one of the cheapest ways to stop expensive water damage, and it’s the first thing we check on an unprotected stack. A stainless or copper cap with a mesh spark screen keeps out rain, birds, and squirrels and typically runs $200 to $550 installed, depending on flue size and the shape of the crown. If the chimney has no cap now, or the one on top is rusted through, that’s a direct path for water into the flue.
Why an Uncovered Flue Costs More Later
Off-season humidity in an unused wood-burning flue condenses on leftover creosote, and once it does, that layer turns acidic and starts eating at clay tile joints. A cap won’t clean the flue, but it stops the rain that feeds the problem, which is why we look at it alongside any repair.
Sizing the Cap to the Appliance
Famco and Copperfield familiarity means the cap, liner, and venting components get chosen to fit the appliance and the flue, not just the opening. A cap that’s too small or poorly seated rattles loose in wind and lets water in at the edges anyway.
Trusted Brands We Service in Richmond
We work with the professional chimney trade brands and install them as part of repair work. HeatShield, the industry’s leading liner resurfacing system, is applied by trained technicians to restore a damaged flue from the inside; DuraFlex liner systems go in where a full stainless liner is the right answer; and Gelco, Olympia Chimney, Famco, and Copperfield components cover caps, venting, and related parts. We don’t stock parts on a truck or run a warehouse, so we spec what your chimney actually needs and schedule the install, which keeps turnaround tight and the fit correct. Call for an exact quote on brand-specific repair.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Richmond Homes
- Cracked exterior crowns on pre-war brick. Rain gets down behind the liner, rusts the damper shut, and starts spalling the brick face. It’s the most common call we get within a few blocks of downtown Richmond.
- Shared and adjacent stacks in dense downtown housing. When one appliance vents into a common or abutting flue, exhaust can drift toward a neighbor’s side, weakening draft and pushing smoke back into the firebox. We smoke-test each flue separately before closing up a repair.
- Acidic creosote eating clay tile joints. Off-season humidity in an unused flue condenses on first- and second-degree creosote, which turns corrosive over a warm Kentucky summer. Mid-century ranches with wood inserts see this a lot.
- Flashing and cap failures on newer builds. Roof-to-chimney flashing pulls loose, or an uncapped flue takes water straight down the stack. Both are quick to fix and expensive to ignore.
Pricing for Chimney Repair in Richmond, KY
Repair pricing in Richmond runs by the job, and the written estimate you get before we start sets the final number. Repointing and tuckpointing typically land between $350 and $900. A new crown or crown coating runs $400 to $900. Cap installation is $200 to $550. Waterproofing a full exterior stack is usually $300 to $700. A HeatShield liner resurfacing or a partial top rebuild is a larger job, often $1,500 to $3,500 depending on length and access. Roof pitch, stack height, and whether a second flue needs work all move the number. The estimate is free.
We Also Serve Cities Near Richmond
We take the same chimney-only approach into the towns around Richmond. Whether you’re in Nicholasville, Winchester, Lexington, or Wilmore, we cover inspection, sweep, and repair across the region, with the same professional-grade materials and the same free written estimate. You can learn more about our chimney repair work, or start with what we do across Richmond and the surrounding area. Call (833) 946-8918 to book.
Serving Richmond, KY – Our Local Coverage Area
We serve Richmond and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Richmond
We smoke-test each flue separately before we close up any repair, so we can see whether a neighbor’s appliance is drafting into your side of the shared stack. If it is, we address the liner and venting components so each flue vents on its own. Shared stacks are common in the older attached brick homes near downtown Richmond, and this step is what keeps a repair from making a cross-contamination problem worse. Call (833) 946-8918 for a free estimate.
A rusted damper usually points to water getting in from above, not the damper itself. On early-1900s exterior chimneys the crown often cracks over spring rains and lets moisture run down behind the flue liner, where it sits on the damper. Fixing the crown and cap is what stops it from coming back. Call for a free estimate on the full repair.
It’s usually both, and the causes are linked. Richmond’s humid summers condense moisture onto creosote left in the flue, and that moisture pushes into the brick from inside while rain works on it from outside. Repointing the joints, replacing the spalled faces, and capping the flue is the combined repair. Call (833) 946-8918 for a free estimate.
Yes, and light use is often the reason. An unused flue is where off-season humidity does its damage to clay tile joints, and problems like a cracked crown show up whether or not you had fires. A camera inspection shows you what’s inside before anything is recommended. Call for a free estimate on the inspection and any repair it turns up.
Sometimes, but the existing flue has to be inspected and sized to the new appliance first. An old wood flue with failing tile joints or heavy creosote usually needs a liner, either a HeatShield resurfacing or a DuraFlex stainless system, before a changeover is safe. We inspect, then tell you exactly what’s needed and what it costs. Call (833) 946-8918 for a free estimate.
Chimney repair in Richmond isn’t something to postpone once water has found its way in. Call Lexington Chimney Cleaning at (833) 946-8918 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and the written estimate sets the price before any work starts.
Written by the team at Lexington Chimney Cleaning.