Masonry repair
Sweep & inspection
Caps & crowns
Flue relining
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Repair Across Wilmore
If your chimney is pulling poorly, showing cracked brick, or hasn’t been looked at since the last burn season, you’re in the right place. We handle chimney repair in Wilmore for homeowners on both sides of town – the century-old houses near the Asbury campus and the farmhouses out on the rural routes in 40390. We know this area well, and we know that a lot of Wilmore chimneys aren’t modern flues at all, which changes how a repair gets planned. Call (833) 946-8918 to get a free estimate.
Why Wilmore Homeowners Call Lexington Chimney Cleaning for Chimney Repair
Wilmore is a small, tight-knit college town, and word travels. Most of our Wilmore work comes from homeowners who want a chimney specialist looking at their flue, not a general contractor squeezing it between roofing jobs. That’s the whole business for us: inspection, sweep, and repair, and nothing else. When a sweep turns up a cracked crown or a liner that’s failed, we’re already the ones who found it.
Our technicians have up to 12 years of experience, and every one of them works on chimneys specifically. We use professional-grade trade materials – DuraFlex, HeatShield, Famco, Copperfield, Olympia Chimney, Gelco – the same products certified chimney specialists use, not hardware-store substitutes. We’re licensed and insured, and nothing gets recommended without camera evidence you can look at yourself. Fast dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Cap Replacement in Wilmore
Chimney Cap Replacement in Wilmore is one of the most common fixes we make, because most of the damage we find up top started as water getting in. A cap does three jobs at once: it keeps rain out of the flue, it stops birds and squirrels from nesting in the smoke chamber, and it gives sparks somewhere to go other than your roof. On the tall exterior brick chimneys common in Wilmore, a missing or rusted-out cap lets water run straight down into masonry that’s already been through decades of Kentucky weather.
When a Cap Is Past Saving
Rusted-through steel, a cap that’s lost a corner to wind, or a mesh screen packed solid with soot all mean replacement rather than repair. A packed screen chokes draft, and poor draft is what pushes smoke back into the room. If your fire smokes on start-up more than it used to, look up before you look anywhere else.
Custom Vs. Standard Fit
Older Wilmore chimneys often have crowns that are out of square or an odd flue dimension, so an off-the-shelf cap leaves gaps. We fit the cap to the actual crown. Copperfield and Famco components give us proper selection for the flue size, which matters for long-term fireplace performance, not just keeping the rain out this season.
Chimney Liner Installation in Wilmore
Chimney Liner Installation in Wilmore is usually the real answer when a flue turns out to be unlined, cracked, or badly mismatched to what’s now connected to it. This is the repair that comes up most in this town, and it isn’t really about cleaning. A clay-tile flue built for an open wood or coal hearth decades ago was sized for that firebox. Put a gas appliance or a wood insert on the end of it and the flue is often too large for the appliance, so draft weakens and combustion gases don’t leave the way they should. A correctly sized stainless liner or a HeatShield resurfacing solves it. HeatShield is installed only by trained applicators, so it’s work a general contractor can’t take on.
Stainless Liners for Wood and Gas
A DuraFlex stainless liner is sized to the appliance, insulated where it needs to be, and connected properly at both ends. It’s the durable route when the existing clay tile is cracked or the flue is the wrong size. We install these as part of repair work, not as an upsell tacked onto a sweep.
HeatShield Resurfacing
When the existing flue is structurally sound but has gaps, cracks, or a rough interior, HeatShield resurfacing rebuilds the liner from the inside. It’s the less invasive option, and it’s a professional-grade system rather than a patch. We recommend it only when the camera shows it’s the right call.
Trusted Brands We Service in Wilmore
We work with DuraFlex liner systems, HeatShield liner resurfacing, Gelco, Olympia Chimney, Famco, and Copperfield. These are professional chimney trade brands, the materials certified specialists specify nationwide. That matters when a component has to be selected for your specific flue and cap, not grabbed off a shelf and made to fit. We don’t stock parts locally and we don’t claim to – what we do is source the right component for the job and get it installed without a long wait, so your chimney isn’t sitting open through the burn season.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Repair Problems We See in Wilmore Homes
- Third-degree glazed creosote. A brush won’t touch this stuff. When wood has been the main backup heat and the flue went years between sweeps, the creosote bakes into a hard glaze, and the honest fix is a liner decision, not another sweeping.
- Spalling brick and cracked crowns. Central Kentucky’s humid summers and freeze-thaw winters work moisture into the masonry, and tall exterior chimneys take the worst of it. You’ll see brick faces flaking off and a crown with hairline cracks that keep widening.
- A wood-era firebox retrofitted with an insert or gas appliance. The firebox and smoke chamber were built for an open hearth. An insert or gas log set dropped into that setup usually drafts poorly, and the flue liner underneath is the wrong size for the new appliance.
- Failed flashing at the roof line. Old step flashing pulls away from brick over time, and water runs down the outside of the chimney into the attic. A proper flashing repair stops it before the framing gets wet.
Pricing for Chimney Repair in Wilmore, KY
Every job is priced per job by a written estimate, and the estimate is free. What we can tell you is what these repairs typically run in the Wilmore market: mortar repointing usually falls around $350 to $900 depending on how much of the joint work is needed, spalling brick repair runs roughly $500 to $1,800, chimney waterproofing is typically $300 to $700, and flashing repair sits around $400 to $1,100. A chimney cap replacement is usually $150 to $450, and chimney liner installation runs from about $1,500 to $4,500 depending on liner type and flue length. Chimney rebuilding on a badly deteriorated stack is a larger project and gets quoted after inspection. We tell you plainly when work can safely wait.
We Also Serve Cities Near Wilmore
Wilmore sits in southern Jessamine County, and we work the surrounding towns as well: Nicholasville, Versailles, Lexington, and Lawrenceburg. If you’re on a rural route outside town, that’s fine – we schedule those along with the in-town work. You can read more about our chimney repair work or about the Wilmore area we serve.
Serving Wilmore, KY – Our Local Coverage Area
We serve Wilmore and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Repair in Wilmore
You likely need a repair, not just a cleaning. A gas appliance on a flue sized for an old wood firebox usually drafts poorly and can leave combustion gases in the wrong place, so the right first step is a camera inspection to see what’s actually inside the flue. Call (833) 946-8918 for an exact quote – estimates are free.
Once a year before burn season is the baseline, and shorter if you’re burning often or burning green wood. On rural routes where wood is real backup heat rather than an occasional fire, creosote builds faster and a shorter interval is the safe call. Call (833) 946-8918 and we’ll help you set an interval that fits how you burn.
It looks like a hard, shiny, tar-like glaze fused to the flue wall. A brush passes over it without removing it, which is why the honest answer is often a liner rather than another sweep. We show you the camera evidence so you can see it yourself. Call (833) 946-8918 for an exact quote – estimates are free.
Moisture. Central Kentucky’s humid summers and freeze-thaw winters push water into the brick and mortar, and a tall exterior chimney takes the weather on all four sides. Spalling brick and a cracked crown are the visible result, and waterproofing plus repointing usually stops the cycle. Call (833) 946-8918 to get it looked at.
Book early, because call volume climbs as temperatures drop in late fall and rural routes take a bit more planning to schedule. We answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. We’re closed on Saturday. Call (833) 946-8918 for a free estimate.
If something about your flue doesn’t look right, or you just want a straight answer before the burn season starts, call (833) 946-8918 for a free estimate. We’re licensed and insured, we work with professional-grade chimney brands like DuraFlex and HeatShield, and we inspect before we recommend anything. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Lexington Chimney Cleaning.