Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Paris, KY
We service Gelco chimney systems across Paris, KY, and the one thing that sets this work apart here is creosote. Gelco liners and top-mount dampers on Bourbon County wood heat tend to carry heavier, glazed creosote than the same equipment a county over, simply because so much firewood gets cut from the homeowner’s own land and burned before it’s ready. That single difference changes how we sweep, what we look for on inspection, and how often a cap or damper needs attention. We’re an independent shop, not affiliated with or authorized by Gelco, and we know their component lineup well enough to spot wear early. Call (833) 946-8918 to book.

Why Paris Residents Choose Us for Gelco Service
Gelco equipment is familiar ground for us. We work on Gelco chimney systems every week, so we recognize the specific wear patterns these liners, top-mount damper combinations, masonry inserts, and self-clean brush sets develop in heavy wood-burning households. That familiarity matters when the equipment has been in real winter service, not just decorative gas logs.
We’re an independent provider and the first to say it. We’re not a Gelco dealer, and we don’t claim factory training or authorization. What we offer instead is honest familiarity: we know how these units fit, how they age, and which parts actually line up correctly.
When a part needs replacing, we choose quality parts that fit the system rather than whatever’s on the hardware store shelf. That keeps draft performance and long-term fireplace function intact, not just the immediate debris cleared out.
Scheduling in Paris is straightforward. Tell us what you’re noticing (weak draft, a creosote smell, a sticking damper) and we’ll book a visit, walk you through what a sweep or inspection involves, and confirm the price before we start. If you’re searching for reputable Gelco service and want a shop that treats the brand like the trade equipment it is, we’re a good fit. Call (833) 946-8918.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Paris
Here’s what we actually run into on Gelco systems around Bourbon County, and why Paris conditions make each one more likely:
- Glazed creosote bonded inside Gelco flexible liners. Burning unseasoned or soft wood cut from the property leaves a hard, shiny layer that fuses to stainless and resists standard sweeping. We see this on county properties far more than in-town. It takes mechanical work plus chemical treatment to break the glaze without scarring the liner.
- Top-mount damper and cap assemblies seizing or rusting shut. Kentucky freeze-thaw over a cold winter works moisture into the moving parts. A damper that won’t open blocks draft and pushes smoke back into the room, and a rusted cap lets water past the crown.
- Loosened liner seams or joints in older Gelco installations. Over-firing, or a liner sized marginally for the flue, stresses the joints. A camera check confirms whether the liner is still holding or has begun to separate.
- Crown and flashing failures on Gelco-capped masonry chimneys. Water tracks down behind the liner and accelerates rust and mortar spalling. Paris has plenty of older brick masonry chimneys where this is a real vulnerability.
- Draft problems from a marginally sized flue paired with a freestanding stove or insert. Rural properties often have appliance setups retrofitted into flues built for something else. The liner may be fine but the draw isn’t what the stove needs.
All three of our core services (inspection, sweep, repair) sit under one team, so a sweep that turns up a glazed liner or a cracked cap doesn’t send you looking for a second company. We find it, we fix it.
Gelco Service in Paris: What Local Conditions Mean for Your Equipment
Paris splits sharply, and that split shows up in chimney work. In-town homes near the Bourbon County courthouse district are often older brick with masonry fireplaces and clay tile liners, chimneys that have taken seasons of real wood heat. Out in the county, farmhouses and newer homes on large lots run freestanding stoves and fireplace inserts, sometimes Gelco-capped masonry chimneys, sometimes a liner installed into an existing flue.
The bigger factor is the wood. Out in Bourbon County, many homeowners burn whatever is on hand from their own land, including unseasoned or soft wood. That wood puts more creosote into a Gelco stainless liner than seasoned firewood would, and the creosote comes in glazed, which means it bonds to the metal instead of sweeping out like fluff. The result is a heavier, harder-to-clear buildup and a higher chimney-fire risk than in towns where people buy kiln-dried firewood. For a Gelco owner, that’s the main thing to know: your liner is likely doing more work than the same liner in a milder, wood-buying climate.
Gelco Models & Products We Service in Paris
We cover the Gelco products that show up in Paris homes. That means Gelco Stainless Steel Flexible Liner Kits (the workhorse in masonry fireplaces and the unit most likely to see glazed creosote), Gelco Top-Mount Damper / Cap Combinations, Gelco Masonry Fireplace Inserts, and even Gelco Chimney Brush and Rod Sets for the homeowners who self-clean between visits.
Parts selection leans toward OEM caps, dampers, and liner components whenever they’re available, because that’s what preserves fit and any remaining warranty. Where the original part has been discontinued, we use quality aftermarket stainless and cast-iron equivalents that seal properly and hold up to the same conditions. No shortcuts, no generic substitutes that leave a gap.
We also lean toward repair over replacement whenever the liner and firebox are sound. A cap replacement or a damper fix on a good Gelco system is far less involved than tearing out a liner. Replacement only comes up when the evidence in the flue (glazing, rust-through, or cracked clay tile) makes continued use unsafe. And it comes from what the camera shows, not guesswork.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Paris
A standard chimney sweep in Paris usually runs $180 to $340, and a Level 2 inspection with camera typically lands in the $250 to $475 range when it’s booked alongside a sweep. Cap replacement on a Gelco top-mount unit is a separate line, and liner repair or HeatShield resurfacing (the industry’s leading liner resurfacing system, installed only by trained applicators) sits higher. Here’s a rough picture:
- Standard sweep, including a Gelco liner check: $180 – $340
- Level 2 inspection with camera and photo report: $250 – $475
- Gelco cap and damper replacement: quote based on the part and the flue
- Gelco liner repair or replacement: assessed after inspection, priced in writing
The written estimate sets the final price. We don’t add dispatch fees or trip charges. The estimate itself is free, and it explains what’s actually in the flue, what can safely wait, and what can’t. If you’re not sure whether your Gelco chimney needs attention this season, call (833) 946-8918. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Serving Paris, KY – Our Local Coverage Area
We serve Paris and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Paris
No, glazed creosote generally can’t be cleared with a standard sweep alone. The glaze bonds to stainless and resists the brush. It usually takes a mechanical sweep combined with chemical treatment to break the glaze down, then a camera check to confirm the liner is intact. Out in Bourbon County, where a lot of unseasoned wood gets burned, this is the most common reason a routine cleaning turns into a two-part treatment. Call (833) 946-8918 for an assessment.
Once a year is the general rule for wood-burning fireplaces and stoves, and Paris households that burn home-harvested wood through the heating season should stick to that schedule. Heavy-use wood heat with unseasoned or soft wood builds creosote faster, so an annual sweep plus a visual inspection is the safest baseline. If draft weakens or a creosote smell appears indoors, book earlier.
It needs parts that match the system, not just any cap that fits over the flue. OEM caps, dampers, and liner components are preferred when available, because they preserve fit and warranty. Where OEM is discontinued, we use quality aftermarket stainless and cast-iron equivalents. Getting the exact sizing right is what keeps draft functioning. A poorly fitted cap lets water in and kills draft.
It can often be repaired. We lean toward repair when the liner and firebox are sound, since that preserves the existing system without a full teardown. Replacement becomes the recommendation only when glazing, rust-through, or cracked clay tile make continued use unsafe. The evidence comes from a Level 2 camera inspection, not from a look down the flue.
A Level 2 inspection covers the full flue with a camera, not just the fireplace opening. That means the interior of the Gelco liner, the seams and joints, the damper and cap assembly, the crown and flashing, and the surrounding masonry. You get a photo report of what we found. The point is that you can see what we see, so no recommendation is made without evidence you can review yourself.
A standard sweep in Paris typically runs $180 to $340, and a Level 2 inspection is usually $250 to $475. Final pricing depends on what’s in the flue and how much work the liner or cap actually needs. Call (833) 946-8918 for an exact quote. The estimate is free and the written price sets the total.
Service Areas Near Paris
We book Gelco work across the Bluegrass region, not just Paris. That includes Lexington up the road, Nicholasville to the southwest, Versailles in Woodford County, and Winchester to the east. Georgetown to the northwest is in reach too. If your Gelco system is in any of these towns, we can book it. You can also read more about our Paris service coverage.
Book Your Gelco Service in Paris Today
Call (833) 946-8918 to book a Gelco chimney cleaning or inspection in Paris. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Service is booked ahead, and we don’t promise same-day. The estimate is free, and the written price sets the final total. Whether your Gelco system is a liner in an older in-town brick chimney or a top-mount combo out on a county property, we can tell you what it needs and what can wait.
Written by the team at Lexington Chimney Cleaning.