Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Wilmore, KY
We provide independent Gelco service across Wilmore, KY, for homeowners whose chimneys carry Gelco caps, dampers, and liners. The one thing that makes our Gelco work different here is that Wilmore’s pre-1950s masonry stock and century-old in-town homes usually need a Level 2 inspection before a sweep, because the flue was built for wood or coal and has often been retrofitted since. We’re an independent chimney company, not affiliated with Gelco, and chimneys are the only thing we service. Our technicians have up to 12 years of experience. Call (833) 946-8918 to book.

Why Wilmore Residents Choose Us for Gelco Service
Gelco components show up in Wilmore on all sorts of chimneys, from farmhouse exteriors with tall masonry stacks to modest mid-century homes closer to the center of town. We’ve handled enough of them to know how the parts fit and how they behave once central Kentucky humidity and freeze-thaw cycles get to work on them. That’s the practical value of a chimney-only specialist: we’re not a roofer or an HVAC tech picking up fireplace calls on the side, so the sweep and the repair are the same visit, not two different trades.
Our familiarity runs across the professional chimney trade brands, and we work with Gelco the same way we work with DuraFlex, HeatShield, Olympia Chimney, Famco, and Copperfield: quality parts selected to fit the equipment already on your chimney. Scheduling in Wilmore is straightforward. We answer 24/7, dispatch runs 7am to 7pm Sunday through Friday, and we’re closed Saturday. Tell us what your chimney is doing and we’ll book a sweep or inspection that fits the burn season.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common Gelco Chimney Cleaning Problems We Solve in Wilmore
The problems we find on Gelco systems around Wilmore tend to trace back to the same handful of causes. Here are the ones that come up most.
- Cracked or spalled clay tile liners. Wilmore’s pre-1950s masonry chimneys take on moisture through humid summers, then freeze-thaw cycles open the joints. A Gelco clay tile liner that looked fine in July can show cracked tiles and gaps by the first cold snap.
- Separated or corroded seams on stainless liners. Prolonged exposure to flue gases and humidity works on the joints of a Gelco stainless steel liner. In a four-season climate with a long damp stretch, seam corrosion is a slow problem that a Level 2 inspection catches before it becomes a venting failure.
- Loose or damaged chimney caps. Wind and falling debris knock Gelco chimney caps out of position. Once a cap is off-square, water gets into the flue and speeds up deterioration of everything below it. Farmhouse chimneys out in the open take more of this than sheltered in-town stacks.
- Sticking top-sealing dampers. In homes where a gas appliance or insert was retrofitted into an old flue, a Gelco top-sealing damper that no longer seals completely lets heat out and moisture in. That shows up as energy loss and draft trouble, not an obvious failure.
- Creosote buildup from heavy wood use. Many Wilmore households still lean on wood heat through the burn season, so creosote accumulates faster than in a decorative fireplace. If the flue is oversized or the lining is obsolete, the deposit builds unevenly and sweeping alone won’t fix the venting.
Gelco Service in Wilmore: What Local Conditions Mean for Your Equipment
Wilmore’s core is dominated by pre-1950s single-family homes and farmhouses with original brick masonry chimneys and clay-tile flues. The important detail is that many of those flues were built for wood or coal, and gas appliances or inserts were later dropped into them without resizing. For a Gelco-equipped chimney, that changes the whole job. A Level 2 inspection often reveals an obsolete flue that needs relining rather than a quick sweep, because the liner, the damper, and the appliance were never matched to each other in the first place. In a typical Wilmore farmhouse with a Gelco clay tile liner, a homeowner might notice draft problems or debris after a few seasons of wood burning. Freeze-thaw cycles and moisture have likely cracked tiles or opened joints, and a qualified technician would perform a Level 2 inspection, remove creosote, and recommend relining with a stainless system or repairing the existing liner to restore safe venting. That’s the pattern here. The sweep is the easy part. Reading the old flue correctly is what protects the house.
Gelco Models & Products We Service in Wilmore
We work on the Gelco products that sit on chimneys in and around Wilmore: the Gelco Chimney Cap, the Gelco Top-Sealing Damper, the Gelco Stainless Steel Liner, and the Gelco Clay Tile Liner. Each one fails in its own way, and each one takes a different approach to put right. For caps and dampers, that’s usually replacement or repair with a component that fits the flue opening properly. For liners, it’s inspection first, then an honest call on whether the existing system can be restored. We use OEM Gelco parts when they’re available for direct fit and compatibility, and high-quality aftermarket components when they meet or exceed original specifications. We’re an independent shop. Not manufacturer-affiliated, not authorized, just experienced with the equipment.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Wilmore
Pricing for chimney work in Wilmore is set per job by a written estimate, so the range depends on what the chimney actually needs. A sweep sits at the low end. A Level 2 inspection with a camera and photo report costs more, because it documents the flue, the liner, the cap, and the damper together. Repairs and relining run higher again, and the estimate spells out the parts and the labor before anything is booked. The estimate is free.
- Chimney sweep: priced per flue, with creosote removal included.
- Level 2 inspection: camera inspection and photo report included.
- Liner repair or relining: quoted after the inspection confirms what’s failing.
- Cap or damper replacement: quoted against the actual flue dimensions.
Nothing gets recommended without camera evidence you can see for yourself, and if the work can safely wait until after the season, we’ll tell you. Call (833) 946-8918 for an exact quote. Estimates are free.

Serving Wilmore, KY – Our Local Coverage Area
We serve Wilmore and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Wilmore
No. We’re an independent chimney service provider with hands-on experience servicing Gelco products, and we’re not affiliated with the manufacturer or authorized by it. What that means for you is a straight assessment of the equipment on your chimney rather than a sales push toward a particular product line. Call (833) 946-8918 to book an inspection.
We use OEM Gelco parts when they’re available for direct fit and compatibility, and high-quality aftermarket components when they meet or exceed original specifications. The choice depends on what fits your chimney and what’s actually available for the specific component. We’ll tell you which one we’re using and why before the work is booked.
A standard sweep usually takes under an hour, while a Level 2 inspection takes longer because it covers the flue, liner, cap, and damper with camera documentation. Repair work depends on what the inspection finds. The written estimate sets the scope before anything starts. Call (833) 946-8918 and we’ll talk through timing for your chimney.
We service Gelco chimney caps, top-sealing dampers, stainless steel liners, and clay tile liners. Each one needs a different approach, from a straightforward cap replacement to a liner assessment that may point toward relining. If your chimney has a Gelco component on it, we can inspect it and tell you what condition it’s in.
It’s priced per job by a written estimate, and the estimate is free. A sweep costs less than a Level 2 inspection, and repairs or relining are quoted after the inspection documents the failure. Wilmore’s older masonry stock sometimes means more diagnostic work up front, since a retrofitted flue has to be read carefully. Call (833) 946-8918 for an exact quote. Estimates are free.
Service Areas Near Wilmore
We serve Wilmore and the surrounding part of central Kentucky, including Wilmore itself, plus Lexington, Nicholasville, Versailles, Winchester, and Paris. If you’re just outside 40390 on one of the rural routes into southern Jessamine County, call and we’ll confirm coverage for your address.
Book Your Gelco Service in Wilmore Today
Whether your Gelco cap is loose, your clay tile liner is showing its age, or your top-sealing damper has stopped doing its job, the first step is an inspection you can trust. Call (833) 946-8918 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Lexington Chimney Cleaning.