Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
HeatShield Chimney Cleaning in Richmond, KY
We provide independent HeatShield service across Richmond, KY. HeatShield is a cast-in-place flue resurfacing system, and the work that matters most here is diagnosing what’s actually failed: the liner, the crown, or both. Richmond’s older exterior chimneys leak at the crown while the HeatShield liner inside stays sound, and sorting one from the other is where we earn our keep. Call (833) 946-8918.

Why Richmond Residents Choose Us for HeatShield Service
We’re an independent HeatShield service provider, not the manufacturer and not affiliated with or authorized by HeatShield. That independence is why Richmond homeowners call us. We work on HeatShield liners every week, alongside DuraFlex, Gelco, Olympia Chimney, Famco and Copperfield systems, so we’ve seen how each one wears. We know the HeatShield Cerfractory and sleeve materials well and use quality parts that fit them, including aftermarket dampers, caps and crowns that hold up better than dealer-only components.
Our technicians have up to 12 years of experience. Every one of them is chimney-specific, not a roofer moonlighting on fireplace calls. We handle inspection, sweep and repair under one roof, so when a sweep turns up a HeatShield problem, we find it and fix it before we leave. Scheduling is straightforward, and we answer 24/7 at (833) 946-8918.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Common HeatShield Chimney Cleaning Problems We Solve in Richmond
- Cerfractory breakdown at the flue collar and damper shelf. On heavy-use wood fireplaces, creosote and condensate pool in these spots and wear the coating thin. Richmond’s long burning season from November through March puts extra hours on that surface each winter.
- Sleeve delamination over clay tile joints. If the tile wasn’t fully cleared before the sleeve went in, the coating blisters and peels over time. We find these during the Level 2 inspection and recommend spot repair where the joint failure is isolated.
- Isolated spalling or cracking in a HeatShield-resurfaced liner. A cracked crown letting spring rain into the flue causes this. It’s a water problem showing up inside the liner, not a liner failure on its own.
- Rusted dampers and firebox corrosion next to a HeatShield liner. Water intrusion goes unaddressed for a season or two and the damper rusts shut. Fix the crown and flashing first, then the liner surface.
- Cap and flashing gaps feeding moisture into HeatShield systems. A loose cap or failing flashing sends water where it shouldn’t go. Famco and Copperfield familiarity means we choose the right replacement instead of patching what won’t last.
HeatShield Service in Richmond: What Local Conditions Mean for Your Equipment
Richmond’s downtown stock includes many early-1900s brick homes whose exterior chimneys have mortar crowns that erode in Kentucky’s spring rains. That’s a separate water problem from the HeatShield liner inside, and it’s one technicians here routinely find behind rusted dampers and spalling brick. A typical Richmond call starts with a homeowner reporting exactly that, often on an older home near downtown or a mid-century ranch in the 40475 ZIP code. A Level 2 inspection usually reveals a cracked mortar crown letting spring rain run down the flue, corroding the damper and any HeatShield-resurfaced liner at the flue collar. The standard fix is crown repair with waterproofing, then spot resurfacing or sleeve repair where the liner is compromised, followed by a cap check. That order matters. Resurfacing over an active water problem just buys time, and not much of it.
HeatShield Models & Products We Service in Richmond
We service the HeatShield product types you’ll find on Richmond homes: cast-in-place Cerfractory flue sealant liner repair, the CeCure sleeve relining system, resurfacing and Reglet-Fix sealant applications, and HeatShield-insulated stainless liner retrofits when resurfacing isn’t the right answer. We choose quality parts that fit whatever is already in your flue. When the liner has failed at a single joint or the crown is the actual water source, repair is often the honest answer. Full relining only makes sense when the liner is compromised along its run. We tell you which case you’re in, with camera evidence you can see yourself.
See the difference
Before
After
Before
After
Before
AfterHeatShield Service Pricing in Richmond
Pricing is set per job by a written estimate, so we can’t quote your HeatShield work before we inspect. What the estimate covers: a Level 2 inspection with camera photos you get to look at, a clear diagnosis of whether the crown, the liner or both failed, and a flat price for the fix. Cost drivers include liner length, how much of the run needs resurfacing versus spot repair, whether crown repair and waterproofing are part of the job, and cap or flashing replacement. Call (833) 946-8918 for a free estimate.
Serving Richmond, KY – Our Local Coverage Area
We serve Richmond and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs – HeatShield Chimney Cleaning in Richmond
No. Resurfacing repairs the flue interior; it doesn’t stop water entering from above. A cracked or spalled crown on an exterior chimney is the source, so crown repair and waterproofing come first, then resurfacing where the liner is actually damaged. Call (833) 946-8918 for an exact quote – estimates are free.
A Level 2 inspection with camera shows it directly. We look for blistering over clay tile joints, isolated spalling and wear at the flue collar, then show you the photos before recommending anything. Call (833) 946-8918 to book the inspection.
Sometimes, but the liner and venting have to match the new appliance. We check the existing HeatShield liner condition and sizing, then tell you what will work and what won’t. Call (833) 946-8918 – estimates are free.
Once a year for wood-burning fireplaces, given the heavy use from November through March here. A yearly sweep also lets us catch coating wear and moisture damage early. Call (833) 946-8918 to schedule yours.
Yes. Crown repair, waterproofing and cap work are part of what we do around HeatShield liners, and often the real first step. Call (833) 946-8918 for a free estimate.
Service Areas Near Richmond
We also serve homeowners in Lexington, Nicholasville, Versailles, Winchester and Georgetown. For our full Richmond service details or to learn how we handle HeatShield liner work, use the links.
Book Your HeatShield Service in Richmond Today
Call (833) 946-8918. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free, and the written estimate sets your price. If your chimney can safely wait, we’ll tell you so.
Written by the team at Lexington Chimney Cleaning.