Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cleaning & Sweep Cost in Lexington?
Chimney cleaning and sweeping in Lexington typically costs $150 to $300 for a standard wood-burning fireplace, with most homes landing around $180 to $250. Gas fireplace and wood stove sweeps often run $130 to $220, and any repair the sweep turns up (a cracked crown, a damaged cap, a failing liner) is quoted separately after inspection. These are typical estimates for the Lexington market in 2026; your written estimate after we look at the flue sets the final price.
We’re chimney-only specialists, so the person who sweeps your flue is the same kind of technician who repairs it. Our technicians have up to 12 years of experience, and we work with professional-grade brands like DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield rather than hardware-store substitutes. Estimates are free.
Key Takeaways
- Standard wood-burning sweep in Lexington: $150 – $300, most commonly $180 – $250.
- Gas fireplace or wood stove sweep: $130 – $220.
- Level 1 inspection is usually bundled into the sweep; Level 2 camera inspection runs $200 – $450 on its own.
- Creosote stage (how glazed the flue is) and roofline access drive most of the price difference.
- Repairs found mid-sweep (crown, cap, liner) are quoted after inspection and priced per job by written estimate.
Chimney Cleaning & Sweep Cost Breakdown (2026)
Here’s what the line items look like for Lexington homeowners. Ranges below are typical for 2026 and assume a one-story or two-story home with reasonable roof access.
| Service | Typical Range | What It Covers |
|---|---|---|
| Standard wood-burning sweep | $150 – $300 | Rod-and-brush cleaning of flue and firebox, plus a Level 1 visual inspection |
| Gas fireplace sweep / service | $130 – $220 | Venting check, debris removal, damper and cap check |
| Wood stove sweep | $150 – $260 | Stovepipe and flue cleaning, baffle check, gasket look-over |
| Level 2 camera inspection (standalone) | $200 – $450 | Video scan of the full flue, often required for a sale, a liner install, or after a chimney fire |
| Heavy creosote (glazed, stage 3) removal | $300 – $600 | Rotary and chemical treatment to break down glazed deposits |
| Chimney cap replacement | $150 – $450 | Famco or Copperfield cap sized to your flue |
| Crown repair | $250 – $650 | Sealing or rebuilding the concrete crown that sheds water |
| HeatShield liner resurfacing | $1,800 – $4,500 | Resurfacing a damaged clay liner in place instead of a full reline |
| DuraFlex stainless liner install | $2,500 – $6,000 | Full-length stainless liner for a failed or unlined flue |
A sweep and a repair are two different jobs with two different prices, and we quote them that way. The sweep price depends on your flue and roof; the repair price depends on what the sweep uncovers. You get a written estimate before any repair work starts, and the estimate is the number you pay.
What drives the cost up or down
On the low end, a single-story ranch with a straight flue, a clean cap, and light soot sweeps fast. On the high end, a steep-pitch roof, a flue with offsets, or a firebox packed with glazed creosote takes longer and more tooling, and the price reflects that. Repairs that need a trained applicator, like HeatShield resurfacing, price higher than a cap swap because the skill floor is higher. We install HeatShield because it’s the industry’s leading liner resurfacing system and only trained applicators can apply it, and that distinction matters when you’re choosing between quotes that look similar on paper.
What Affects Chimney Cleaning & Sweep Pricing in Lexington
Two Lexington chimneys on the same street can price differently. Here’s what moves the number.
- Fuel type. A wood-burning fireplace produces real creosote and soot, so a sweep takes longer than a gas fireplace that mostly needs a venting check. Wood stoves sit in between but can accumulate hard deposits in the stovepipe.
- Creosote stage. Light, flaky soot is a standard sweep. Glazed, tar-like stage 3 creosote needs rotary tools or chemical treatment, and that’s a higher line item. This is the single biggest variable in Lexington pricing.
- Roofline and chimney height. A one-story home with a short chimney is quick access. A tall chimney on a steep roof, or one with a tight clearance next to a tree canopy, takes more setup and sometimes a roof-level inspection.
- Chimney condition. A chimney that hasn’t been swept in several seasons, or one with a cracked crown or missing cap, needs more time and inspection. We look at the flue, firebox, damper, cap, and crown every visit.
- Flue configuration. Straight flues clean fast. Offsets, elbows, and multiple flues in one stack take longer and sometimes need a camera inspection to check the liner.
- Access and safety setup. Interior access through the firebox versus roof access, plus the time to protect the room with drop cloths, all factor into what a proper sweep costs.
Lexington homes with mature tree cover around older neighborhoods deal with more debris in the cap screen, which can shorten the interval between sweeps. If your cap looks packed with leaves and twigs, it’s worth mentioning when you call.
Inspection, Sweep, and Repair: Where the Money Goes
A sweep is part of a larger cycle. Skipping the inspection to save money usually costs more later, and separating the trades means calling a second company when the sweep finds a problem. We handle inspection, sweep, and repair under one roof, so the technician who finds the issue can quote the fix. That’s the “we find it, we fix it” part of how we work.
Most sweeps include a Level 1 visual inspection of accessible chimney components. A Level 2 camera inspection is a separate service, priced $200 – $450, and it’s the right call when you’re buying or selling a home, after a chimney fire, or before a liner installation. If the camera shows a cracked or spalling clay liner, HeatShield resurfacing ($1,800 – $4,500) can often restore it in place. When resurfacing won’t hold, a DuraFlex stainless liner ($2,500 – $6,000) is the professional-grade repair, and we stock the components through DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield.
Cap and crown repair sit in the middle. A Famco or Copperfield cap sized correctly for your flue runs $150 – $450, and a crown repair runs $250 – $650. Those are small line items against a liner, but they’re the ones that keep water out of the flue and protect the liner you already have. Proper cap and venting component selection is a detail that protects long-term fireplace performance, not just clears the immediate debris.
How to Save on Chimney Cleaning & Sweep in Lexington
A few practical moves keep the price down without cutting corners on safety.
- Do the annual sweep. A yearly sweep keeps creosote at the light-soot stage. Let it go several seasons and you’re paying for heavy-creosote removal, which is a bigger line item.
- Book the sweep before fall. Schedule ahead of the first cold snap so the sweep isn’t competing with a backlog of fireplaces waking up for the season.
- Bundle the inspection. A Level 1 inspection is normally part of the sweep. Paying for a separate inspection when you don’t need a camera scan just adds cost.
- Ask for a written estimate before repairs. Get the repair quoted in writing after the sweep so you can compare the options. Estimates are free, and we’ll talk through whether a cap fix or a liner repair is the right move.
- Keep the cap clear. Clear debris from the cap screen when you notice it packed with leaves. A clogged screen is one of the easier problems to catch early.
Call (833) 946-8918 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
How Often Should You Schedule a Chimney Sweep in Lexington?
Once a year is the working rule for a wood-burning fireplace, and that keeps you in the standard $150 – $300 range instead of the heavy-creosote range. A gas fireplace usually needs less frequent venting checks, and a wood stove that sees heavy use may need a sweep sooner than the annual mark. If you burn often and notice a smoky smell or a slower draw, don’t wait for the calendar. We answer 24/7, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Is Chimney Cleaning Covered by Insurance or Home Warranty?
Routine sweeping is almost never covered by homeowner’s insurance, because it’s considered maintenance. Repairs are a different story: damage from a chimney fire or a sudden event may be covered, depending on your policy, and a Level 2 camera inspection with a written report is often what an adjuster asks for. We don’t bill your insurance directly, but we can work with your insurer and provide the inspection documentation and photos you need for a claim. Read your policy and call your agent before assuming a repair is or isn’t covered.
When Should You Call a Chimney Specialist?
Call a specialist when a sweep turns up something that needs repair, when you smell smoke in the house, when the firebox has visible cracks, or when you haven’t had the flue looked at in more than a year. A chimney fire can damage a liner without obvious signs, so it’s worth a camera inspection after one. High-tension components aren’t the only safety concern – a blocked flue or a cracked liner lets carbon monoxide back into the home, and that’s not a job for a general handyman. A trained chimney technician should look at the flue, damper, cap, and crown. We’re chimney-only specialists, so every technician works on chimneys and nothing else, and we use HeatShield for liner resurfacing because it’s a specialized system with a higher skill floor than general contracting.
FAQs – Chimney Cleaning & Sweep Cost
How much does a chimney sweep cost in Lexington?
A standard wood-burning chimney sweep in Lexington runs $150 – $300, with most homes around $180 – $250. Gas fireplaces and wood stoves often fall between $130 and $220. Call (833) 946-8918 for an exact quote. Estimates are free.
Is it cheaper to sweep the chimney or skip it and repair later?
Sweeping is always cheaper. A yearly sweep at $150 – $300 keeps creosote at the light stage, while letting it glaze to stage 3 pushes removal to $300 – $600, and a liner failure from a chimney fire can reach $2,500 – $6,000. Call (833) 946-8918 for a free estimate and book the annual sweep.
Do you charge extra for a chimney inspection?
No, a Level 1 visual inspection is normally included with the sweep. A standalone Level 2 camera inspection runs $200 – $450 and is a separate service for home sales, post-fire checks, or before a liner install. Call (833) 946-8918 to find out which inspection your flue needs.
Can you come today?
Same-day service is often possible. We answer 24/7, and we run fast dispatch from 7am to 7pm, Sunday through Friday. Call (833) 946-8918 and we’ll book you into the next opening. A call outside dispatch hours is booked into the next opening.
How much does a chimney liner repair cost in Lexington?
A HeatShield liner resurfacing runs $1,800 – $4,500, and a full DuraFlex stainless liner install runs $2,500 – $6,000. Resurfacing is often the lower-cost path when the clay liner is still structurally sound. Call (833) 946-8918 for a free estimate.
How much does a chimney cap cost?
A correctly sized Famco or Copperfield cap costs $150 – $450, depending on flue size and cap style. A cap keeps water, animals, and debris out of the flue, so it’s a small line item with real protection value. Call (833) 946-8918 for a free estimate.
Why is a glazed creosote sweep priced higher?
Glazed stage 3 creosote is hard and tar-like and needs rotary or chemical treatment, which runs $300 – $600 instead of the standard $150 – $300. The higher price reflects the extra tooling and time. Call (833) 946-8918 and we’ll quote the sweep before any work starts.
Free Estimates and How We Price
Every estimate is free, and the written estimate sets the final price. We quote the sweep, then the repair separately once we’ve looked at the flue, so you know exactly what you’re paying for. If the sweep finds a problem, we can quote the fix on the spot. That’s the convenience of a chimney-only specialist: one call handles inspection, sweep, and repair.
Call (833) 946-8918 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Lexington Chimney Cleaning.
Pricing reflects the Lexington market as of 2026. Lexington Chimney Cleaning offers free estimates – call (833) 946-8918.
What Our Customers Say
"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Wade Sutton"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Katie Whitaker"Work is good and the price was fair. The scheduling was a little loose, the window they gave me was pretty wide and he showed up at the back end of it. Once he was here he was quick and knew what he was doing."
- Dale Schaefer