Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Lexington?
A chimney liner replacement in Lexington typically costs $2,200 to $5,800, and a partial or full chimney rebuild usually runs $4,500 to $15,000 depending on how much masonry is involved. Most straightforward liner jobs land around $3,400, while a rebuild that includes a new crown, flashing, and relining sits closer to $8,000 to $11,000. These are estimates for the Lexington market in 2026; the written estimate you receive sets the final price.
We handle liner and rebuild work as one job when the chimney calls for it, and that continuity matters. A sweep often uncovers a cracked flue or spalling brick that a general contractor would hand off to someone else. Chimney-only specialists stay with the problem from inspection through repair. Call (833) 946-8918 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Chimney Liner & Rebuild Cost Breakdown (2026)
Here’s what the main pieces of liner and rebuild work cost in Lexington this year.
| Line item | Typical cost range |
|---|---|
| Stainless steel liner, single-story chimney | $2,200 – $3,600 |
| Stainless steel liner, two-story chimney | $3,200 – $5,800 |
| Insulated liner upgrade | $400 – $900 added |
| HeatShield flue resurfacing (partial) | $1,400 – $2,800 |
| HeatShield full-length resurfacing | $2,600 – $4,900 |
| Chimney crown rebuild | $600 – $1,500 |
| Repointing brick (per section) | $800 – $2,400 |
| Partial rebuild (top 5 – 10 courses) | $4,500 – $8,500 |
| Full chimney rebuild above roofline | $9,000 – $15,000 |
| New cap and flashing | $350 – $900 |
| Damper replacement | $400 – $1,100 |
What pushes a quote toward the top of those ranges? Height is the biggest single factor. A two-story flue needs more liner, more staging, and more time on a ladder, and that shows up in the price. Access matters too. A chimney on a steep roof or hemmed in by landscaping takes longer to work on safely. The condition of the existing flue decides whether you’re looking at a straightforward reline or a resurfacing job where the clay tile is still sound enough to save. And if the rebuild uncovers hidden damage once the first courses come off, the scope grows. We write the estimate to reflect what we can see, and we tell you up front where a surprise is possible.
What Affects Chimney Liner & Rebuild Pricing in Lexington
- Chimney height and roofline. Lexington’s older neighborhoods have a lot of two-story homes with tall chimneys, and every extra foot of flue adds liner material and labor. A tall chimney on a steep roof also needs more careful setup before anyone touches the flue.
- Liner material and system. We install DuraFlex liner systems, a professional-grade stainless product with industry-recognized performance. The grade of stainless and whether it’s insulated both change the price, and so does the flue’s shape. Oval flues and offset flues take more work to line than a straight round one.
- Flue condition. A flue with cracked or missing clay tiles needs a full reline. One that’s still structurally sound but has a rough interior can often be resurfaced with HeatShield instead, which is usually less than a full stainless install. We use HeatShield because it’s a specialized system installed by trained applicators, not something a general contractor can hand you.
- Extent of masonry damage. Spalling brick, crumbling mortar joints, and a failed crown are common in chimneys that have seen decades of freeze-thaw cycles. Central Kentucky winters swing hard between freezing and thawing, and water that soaks into brick and then freezes pushes the face off. The more courses that need to come down and go back up, the higher the rebuild cost.
- Chimney location on the roof. A chimney on a ridge is easier to reach than one tucked against a dormer or a valley. Difficult access adds setup time and sometimes scaffolding.
- What’s burned in the fireplace. A wood stove running hot needs a heavier-grade liner than a gas fireplace, and the appliance connection is a separate fitting. Tell us what you burn so the estimate matches the real duty the flue will see.
How to Save on Chimney Liner & Rebuild
The single biggest saver is timing. A flue resurfaced with HeatShield while the clay tile is still sound costs far less than a full stainless reline after the tile has cracked through. Annual inspection is what catches the problem at that cheaper stage, and a sweep and inspection together are a small fraction of what a rebuild runs. If you haven’t had the chimney looked at in a while, start there before assuming you need the big job.
Second, get the whole scope in one estimate. If a sweep turns up a liner problem, having the same chimney-only team do the repair means no second call, no second inspection fee, and no gap where one contractor blames the other. We find it, we fix it. Third, ask specifically what’s driving the number. Sometimes a crown rebuild plus repointing solves a water problem that a full rebuild would also solve, at a third of the cost. Sometimes the reverse is true and patching just delays the inevitable. A straight answer on that question saves real money either way.
Fourth, don’t skip the cap. A properly fitted cap from a professional line like Famco or Copperfield keeps rain, birds, and debris out of the flue, which is what causes a lot of the interior damage that leads to relining in the first place. It’s one of the cheapest line items on the table and one of the most protective. Call (833) 946-8918 for a free estimate on any of this.
Repair or Replace: Which Makes Sense?
Resurfacing with HeatShield is usually the right call when the clay tile is intact but the interior is rough, cracked at the joints, or has gaps that let creosote and moisture behind the tile. A full stainless reline is the right call when the tile is missing, collapsed, or the flue was never lined to begin with. Rebuild territory starts when the brick itself is failing, not just the flue interior.
The decision usually comes down to how much sound masonry is left. If the brick above the roofline is spalling on the face and the mortar joints crumble when you touch them, resurfacing the flue won’t fix the structure around it. If the brick is solid and only the flue is compromised, a liner solves the problem at a fraction of a rebuild. Our technicians have up to 12 years of experience reading that difference, and we’ll tell you plainly which category your chimney falls into.
Why Professional-Grade Materials Matter on a Liner Job
A liner is only as good as the steel and the installation. We work with DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield, the same professional trade brands used by chimney specialists nationwide. That’s not a sales point, it’s a practical one. Hardware-store liner kits often use thinner steel and generic fittings, and the difference shows up years later when a joint fails or a cap rusts through.
Famco and Copperfield familiarity means the cap, liner, and venting components get selected to fit your chimney properly, which protects long-term fireplace performance rather than just clearing today’s debris. HeatShield is a trained-applicator product, so the skill floor is higher than what a roofer or handyman moonlighting on fireplace calls can offer. Chimneys are the only service we offer, and that single-trade focus is why we can stand behind the materials we install.
When to Get a Liner or Rebuild Estimate
Some signs are obvious and some aren’t. Call for an estimate when you notice any of these:
- Crumbling mortar or loose brick on the chimney exterior
- White staining on the brick, which often means water is moving through it
- A chimney crown that’s cracked or pulling away from the flue
- Smoke coming back into the room when you light a fire
- Creosote buildup or a flue that looks rough or cracked on inspection
- A chimney that’s never been lined, common in older Lexington homes
If a sweep uncovers one of these, we can move straight into the repair estimate. That’s the advantage of working with a company that does inspection, sweep, and repair under one roof. Reach out to Lexington Chimney Cleaning for a free estimate, and if you’re in Lexington, we’ll get you on the schedule.
FAQs – Chimney Liner & Rebuild Cost
How much does a chimney liner cost in Lexington?
A chimney liner in Lexington typically costs $2,200 to $5,800, with most jobs landing around $3,400. Height is the main variable: a two-story flue runs higher than a single-story one, and insulated liner systems add $400 to $900. HeatShield resurfacing, which saves a sound flue without a full stainless install, runs $1,400 to $4,900 depending on length. Call (833) 946-8918 for an exact quote. Estimates are free.
How much does a chimney rebuild cost in Lexington?
A partial rebuild of the top courses runs $4,500 to $8,500, and a full rebuild above the roofline runs $9,000 to $15,000. The range depends on how many courses come down, whether the crown and flashing are replaced at the same time, and how accessible the chimney is on the roof. A crown rebuild alone is $600 to $1,500, and repointing brick runs $800 to $2,400 per section. Call (833) 946-8918 for a free written estimate.
Is it cheaper to repair or replace a chimney liner?
Repair is cheaper when the clay tile is still sound. HeatShield resurfacing at $1,400 to $4,900 usually beats a full stainless reline at $2,200 to $5,800, and it preserves the existing flue. Once the tile is cracked through or missing, resurfacing isn’t an option and a stainless reline or rebuild is the only safe route. Call (833) 946-8918 and we’ll tell you which category your flue is in. The estimate is free.
Can you come today?
Yes, same-day service is often available. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening. Call (833) 946-8918 to check availability and get a free estimate.
Does a chimney liner or rebuild need a permit in Lexington?
Most cities require a permit for structural chimney work and sometimes for liner replacement, so ask your city’s building department what applies to your address before work starts. We can talk through what the scope will involve so you know what to ask. Call (833) 946-8918 for a free estimate and we’ll walk you through it.
If your chimney needs a liner or a rebuild, the cheapest path is usually the one taken early. A free estimate tells you which category you’re in and what it will run. Call (833) 946-8918. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday.
Pricing reflects the Lexington market as of 2026. Lexington Chimney Cleaning offers free estimates. Call (833) 946-8918.
Written by the team at Lexington Chimney Cleaning.
What Our Customers Say
"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Wade Sutton"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Katie Whitaker"Work is good and the price was fair. The scheduling was a little loose, the window they gave me was pretty wide and he showed up at the back end of it. Once he was here he was quick and knew what he was doing."
- Dale Schaefer