Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Richmond, KY
If you own a fireplace in Richmond, KY, the first thing you need most years is a straightforward chimney inspection – not a sales pitch. Richmond sits in a stretch of Kentucky where winters run cold enough for steady burning from November through March, and where the housing stock swings from early-1900s brick near downtown to mid-century ranches and newer construction out in the 40475 ZIP code. Those two ends of the market behave differently inside the flue. Older masonry chimneys usually carry clay tile liners and decades of moisture exposure, while newer homes often have manufactured fireplaces that need their own specific venting checked. We handle inspection, sweeping, and repair under one roof, using professional-grade chimney brands like HeatShield and DuraFlex. Call (833) 946-8918 to book a visit.
Why Richmond Homes Are Different
The work in Richmond changes with the building, and the building changes with the block you’re standing on. Around the historic downtown core, exterior chimneys are common, and many of them have mortar crowns that have been slowly letting in water during Kentucky’s spring rains. The results show up inside the firebox: rusted dampers, spalling brick, and cracked chimney crowns that a homeowner may never notice from the ground.
The climate does its own work on the off-season. Richmond’s humid subtropical weather means warm, damp summers – the exact conditions that let creosote residue absorb moisture and let masonry keep breaking down long after the last fire of March. A chimney that looked fine in winter can show fresh spalling by late summer.
Out in rural Madison County, we routinely see manufactured fireplaces and freestanding wood stoves, often in the same week as a pre-war masonry chimney back in town. Those two systems call for different inspection routes, different tools, and different decisions about what actually needs repairing. A technician who handles both without adjusting is guessing. That mix is the single biggest reason Richmond chimney work needs eyes on it rather than a phone diagnosis.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Richmond Services
Most Richmond homeowners call us about one of two things: an annual sweep to keep the flue clear, or a repair once an inspection turns up a problem inside the chimney system.
Chimney Sweep in Richmond
In Richmond, a sweep is a full cleaning of the flue and firebox, done with the right tool for the liner you actually have – a poly brush on a clay tile liner, a different approach on a manufactured fireplace. We run a camera through the flue first so the sweep doesn’t miss a creosote shelf or a hidden obstruction, then clean down to bare masonry or metal and bag the soot so it never reaches your living room. Late summer and early fall fill up fast here because of the November-to-March burn season. Book a chimney sweep before the first cold snap and the job stays simple.

Chimney Repair in Richmond
Repair work around downtown Richmond tends to center on water intrusion – deteriorated mortar crowns, cracks in the brickwork, dampers that have rusted shut – while out in the county we see more liner and venting repairs on wood stoves and manufactured fireplaces. We use professional-grade systems, including HeatShield resurfacing to repair a damaged flue from the inside and DuraFlex stainless liners when a liner is beyond resurfacing. Nobody here treats a bad cap or a cracked crown as a quick patch. Properly done chimney repair means the chimney sheds water the way it was built to.

Chimney Inspection in Richmond
Chimney Inspection in Richmond is the starting point for every other job we do, and the reason is the local housing stock. Pre-war brick homes near downtown typically have original clay tile liners that have absorbed decades of moisture and need to be looked at from the inside, not from the roof line. Homes built later, especially in the 40475 ZIP code, often have factory-built fireplaces where the venting details matter more than the chimney’s age. A proper Chimney Inspection tells you which category your house falls into and what, if anything, actually needs work.
We don’t recommend anything we can’t show you on camera. Our technicians have up to 12 years of experience, and they’ve learned that the fastest way to lose a homeowner’s trust is to tell them they need thousands of dollars of work they can’t verify. So the inspection includes video of the flue and a written report with stills, and we say plainly when a repair can safely wait until next season.
Chimney Flue Inspection
Signs you need it
You need a flue inspection if it has been more than a year since the chimney was looked at, if the fireplace smells smoky when it isn’t lit, or if you notice staining on the exterior brick or a flue that drafts poorly.
What it costs in Richmond
A standard chimney inspection in Richmond typically runs $150 to $275, and a Level 2 inspection with video scanning usually falls in the $225 to $450 range.
How we do it
We run a camera down the full length of the flue to check for cracks, gaps in the clay tiles, and creosote buildup, document what we find with stills from the footage, then walk you through it before we recommend anything.
Level 2 Chimney Inspection
Signs you need it
A Level 2 inspection is the right call after a chimney fire, a change of heating appliance, a property sale, or any time a basic visual check turns up something that needs a closer look.
What it costs in Richmond
Plan on roughly $225 to $450 for a Level 2 inspection in Richmond, which includes the video scan and a written report with stills.
How we do it
We inspect every accessible part of the system – flue, firebox, damper, crown, cap, and any connected appliance venting – and record the findings on video so nothing depends on a verbal description.
What Chimney Inspection Costs in Richmond
| Item | Typical range in Richmond |
|---|---|
| Standard chimney inspection | $150 – $275 |
| Level 2 inspection with video scan | $225 – $450 |
| Inspection plus written report and photo documentation | $200 – $400 |
How often should a Richmond chimney be inspected?
Once a year is the standard for any chimney in active use, and Richmond chimneys that burn heavily from November through March should be inspected annually without exception. Call (833) 946-8918 to book an inspection – estimates are free and we answer 24/7.
What happens if my chimney fails an inspection?
Usually nothing dramatic. Most findings are minor – a deteriorating crown, a small crack in a clay tile, a damper that needs freeing up – and we’ll tell you which ones need repair now and which can wait a season. Call (833) 946-8918 for an exact quote on any repair.
Brands We Service in Richmond
We work with professional-grade chimney components rather than hardware-store substitutes: HeatShield for flue resurfacing, DuraFlex for stainless liner systems, and Famco and Copperfield for caps and venting. If a job calls for a brand we don’t carry, we tell you so rather than substituting something close. See our brands for the full picture. Most repairs are scheduled within a week of the inspection.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Richmond, KY
These are typical ranges for Richmond work, not fixed prices. Every quote is written before we start, and the estimate sets the final number.
| Service | Typical range in Richmond |
|---|---|
| Standard chimney inspection | $150 – $275 |
| Level 2 inspection with video scan | $225 – $450 |
| Inspection plus written report and photo documentation | $200 – $400 |
| Chimney sweep (standard flue) | $175 – $325 |
| Sweep plus inspection package | $250 – $425 |
| Chimney cap installation | $200 – $450 |
| Crown repair or rebuild | $350 – $1,200 |
| Damper repair or replacement | $250 – $600 |
| Flue relining (HeatShield resurfacing) | $1,800 – $4,500 |
| Stainless liner installation (DuraFlex) | $2,200 – $5,500 |
| Masonry repair and repointing | $500 – $2,500 |
Two things push the price up most often in Richmond: the age and condition of the masonry on pre-war homes near downtown, where a crown repair can turn into repointing once the mortar gets opened up, and the length or configuration of the flue on a taller chimney, which changes how much liner material a job needs. Because the estimate is written before we start, none of that surprises you at the end.
Neighborhoods We Serve in Richmond
We work throughout Richmond and the surrounding part of Madison County. Homes near the historic downtown core and the older brick blocks around it get the pre-war masonry treatment, while properties out toward the rural edges of the county more often have manufactured fireplaces or freestanding wood stoves. Response around Richmond is fast – dispatch runs 7am to 7pm, Sunday through Friday, and we book inspections into the next open slot. If you’re not sure whether your address is covered, the ZIP codes we see most are centered on 40475.
- Historic downtown Richmond
- Eastern Bypass area
- Lake Reba
- Gibson Bay
- Rural Madison County properties
Service Area – Cities Near Richmond
Richmond sits close to several communities we cover regularly. If you’re just outside Richmond, we can usually fold your visit into a nearby route – book it and we’ll confirm the slot. We work in Nicholasville, KY, which is a short run west on US-27, and in Winchester, KY to the northeast. To the north we serve Lexington, KY, and to the northwest Wilmore, KY. Each area has its own housing mix, and we adjust the inspection approach accordingly rather than treating a 1920s brick chimney the same as a manufactured fireplace.
Serving Richmond, KY – Our Local Coverage Area
We serve Richmond and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Richmond
Usually within a few days of your call, and often sooner in the off-season. We answer 24/7, and dispatch runs 7am to 7pm, Sunday through Friday, so a call outside dispatch hours gets booked into the next open slot. Call (833) 946-8918 to schedule.
It depends on the scope. A sweep or inspection needs no permit, but structural masonry work or a full liner replacement may require one, so ask the city’s building department before work begins. We’ll tell you when a job is likely to need a permit before we start.
Yes. We serve homes throughout Madison County, not just inside Richmond proper, including properties with wood stoves and manufactured fireplaces on larger lots. Call (833) 946-8918 and we’ll confirm coverage for your address.
If your chimney hasn’t been looked at since last season, or something about it seems off, the next step is a call. Call (833) 946-8918 for a free estimate. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Richmond Customers Say
"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
- Wade Sutton"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Katie Whitaker"Work is good and the price was fair. The scheduling was a little loose, the window they gave me was pretty wide and he showed up at the back end of it. Once he was here he was quick and knew what he was doing."
- Dale Schaefer