G

Gelco Chimney Cleaning Service in Lexington, KY

Gas fireplace serviceGas fireplace service
Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Why Lexington Homeowners Choose Gelco Chimney Cleaning

We provide independent Gelco chimney cleaning, inspection, and repair in Lexington, KY. We’re a chimney-only company, so every technician who works on your Gelco cap or liner does chimney work and nothing else. Our technicians have up to 12 years of experience with professional-grade chimney components, and we scope each Gelco job by measuring your flue and confirming your appliance category instead of guessing at a universal fit. To be clear: we are an independent service provider and are not affiliated with or authorized by Gelco. We just work on Gelco systems and know how they behave. Call (833) 946-8918 and we’ll set up a visit.

Professional technician performing brick chimney repair with a mortar trowel in Lexington, KY

Call (833) 946-8918

Why Trust Lexington Chimney Cleaning for Your Gelco Chimney Cleaning?

Gelco components are dimensional. A cap or liner section is built to a specific inside diameter and rated for a specific appliance category, which means the fit either matches your chimney or it doesn’t. Our technicians read those dimensions the way they read the flue itself, and they’ve spent years doing it on Gelco systems around Lexington.

We use quality parts that fit Gelco equipment. That’s not the same as claiming we stock genuine Gelco parts or that we’re a dealer, because we don’t and we aren’t. What it does mean is that when a cap or liner component has to come out, the replacement is matched to your measured flue and your appliance rather than swapped for whatever generic piece is closest to hand. A universal cap on a measured flue is how draft problems start.

Warranty-safe service matters here too. We keep documentation of what we inspect, what we measure, and what we change, so if a question ever comes up with the manufacturer you have a record of the work. Nothing gets recommended without camera evidence you can see for yourself on the monitor. We tell you plainly when a Gelco component is sound and can be reused, and we tell you when it has to come out. That distinction is the whole job.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Common Gelco Chimney Cleaning Problems We Fix in Lexington

Gelco caps and liners fail in a handful of predictable ways. Here’s what we find most often in Lexington chimneys.

  • Corroded or bird-clogged cap screens and louvers. A Gelco cap is doing two jobs at once: keeping rain and animals out, and letting flue gas escape. When the screen rusts shut or a nesting bird packs it solid, both jobs fail together. Draft drops, smoke backs into the room on startup, and water starts finding its way down the flue. Clearing the screen is often a five-minute fix during a sweep, but a corroded louver assembly that no longer sheds water needs to be replaced.
  • Kinked or crimped flexible liner sections. Flexible stainless liner gets pushed down a flue that isn’t perfectly straight. If it was forced during an earlier install, a section can crimp, and a crimp becomes a shelf. Creosote collects on that ledge, the flue narrows at that point, and the brush can’t do its job cleanly. Sweeping a kinked liner without knowing it’s there is how a restriction gets missed for years.
  • Unsealed liner-to-cap and liner-to-appliance connections. These are the joints that get skipped. If the liner isn’t clamped or sealed where it meets the cap, or where it meets the appliance collar, creosote-laden flue gas leaks into the chase instead of going up and out. You may not see it from the firebox, but a camera inspection finds it fast.
  • Undersized or corroded caps on clay-tile flues. Many Lexington chimneys built for coal were later converted to gas or wood without resizing anything. A Gelco cap sized for the old opening may no longer shed water properly over the current flue, and rain running down the liner degrades the mortar joint at the top. Once that joint softens, water gets into the masonry.
  • Caps sitting on compromised crowns. A cap can be in fine shape while the crown it sits on has cracked. Freeze-thaw cycles from December to March work on those cracks all winter. When we’re on the roof for a cap inspection, we look at what the cap is mounted to, not just the cap.

The pattern behind most of these is dimensional: somebody installed the right kind of product at the wrong size, or installed it without sealing the connection. That’s what we check first.

Gelco Parts & Our Repair-vs-Replace Approach

Because Gelco liners and caps are dimensional products, the correct replacement is the one matched to your measured flue and your appliance category. We measure the existing flue, confirm the appliance rating, and match the component. We don’t substitute a generic aftermarket piece and hope it fits. We also don’t claim to stock genuine Gelco parts or to be a Gelco dealer, because we aren’t either of those things. We source quality parts that fit the equipment that’s actually on your chimney.

The repair-or-replace decision comes down to condition, not age. Where a Gelco cap or a liner section is sound, we retain it and reseal the connection rather than selling a full replacement. Where a liner section is kinked beyond what a sweep can clear, or a cap no longer sheds water, replacement is the honest answer. You see the camera footage and you decide with us looking at the same screen.

If you’re wondering whether your Gelco setup can be repaired rather than replaced, call (833) 946-8918. Estimates are free and the written estimate sets the price.

Our Gelco Service Process – Step by Step

  1. 1
    Diagnosis. We start with a Level 2 inspection, which includes a camera run of the flue. For a Gelco system that means confirming the liner’s inside diameter, its appliance category rating, and the condition of every joint from the appliance collar up to the cap. We look specifically for kinked sections, unsealed connections, and a cap that’s corroded, screened over, or undersized for the flue beneath it.
  2. 2
    Repair or install. If a Gelco component is serviceable, it stays and we reseal or reclamp the connection. If it isn’t, we match the replacement to the measured flue and appliance. Creosote removal happens with poly brushes sized for stainless, not with anything that will scar the liner wall.
  3. 3
    Test. We check draft after the work, confirm the cap sheds water and the screen is clear, and run the camera back through the section we touched so you can see the result.
  4. 4
    Documentation. You get a record of what was measured, what was changed, and what was left alone. That record is what makes the service warranty-safe.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Gelco Products We Service & Install in Lexington

We work on Gelco stainless steel chimney liner kits, both single-wall and insulated configurations, and on Gelco flexible stainless relining kits. On the cap side, we service and install Gelco Deluxe and Economy chimney caps, along with multi-flue and custom-fabricated caps where the chimney top calls for one. Insulated liner configurations come up often on Lexington chimneys converted from coal to wood or gas, because the original flue was never sized for the current appliance.

Professional technician performing brick chimney repair with a mortar trowel in Lexington, KY

We service these as an independent provider. No manufacturer authorization is implied, and none is needed for us to inspect, sweep, or repair what’s on your chimney. What matters is that the component on your flue gets matched to the flue itself.

We Also Service These Brands

Gelco isn’t the only liner and cap system we work on. We also service DuraFlex and HeatShield systems, and we handle liner resurfacing with HeatShield where that’s the right repair for the flue. If your chimney has a mix of components, or you’re not sure what’s up there, that’s fine. We identify it during the inspection and go from there. A single-brand shop would have to send you elsewhere.

FAQs – Gelco Chimney Cleaning Service in Lexington

Book Your Gelco Service in Lexington, KY

If you have a Gelco cap or liner and something isn’t behaving the way it should, the fastest path is a call. We inspect with a camera, measure the flue, and tell you what can stay and what has to go. Call (833) 946-8918. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free and the written estimate sets the price.

Written by the team at Lexington Chimney Cleaning.

Need Chimney Cleaning help nationwide? Licensed & insured · free written estimates
Call (833) 946-8918
Local Service Coverage

Request a Free Estimate in Lexington

Tell us what you need - Lexington Chimney Cleaning responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - We Answer 24/7